Nationwide ERRCS / BDA Services

Failed Your ERRCS Test?

If your building failed a fire department radio coverage test, Berk-Tel provides nationwide ERRCS / BDA engineering, system design, installation, testing, commissioning and AHJ coordination. Talk with our team about your test results and project requirements.

Speak With a BDA / ERRCS Expert ☎  866-206-5967
Have your failed test report or project information available? Tell us what happened and we can help identify the next steps.
Berk-Tel ERRCS and BDA public safety radio coverage system
✓
20+ Years Industry Experience
✓
Nationwide Service & Installation
✓
Millions of Sq. Ft. Systems Installed
✓
AHJ Experience Fire Chiefs & Inspectors
Project Assistance

Failed an ERRCS Test?

Tell us about your building, failed test or project requirements.

Prefer to talk? 866-206-5967

Failed Your ERRCS Test? Don’t Panic — This Happens Often

If your building just failed an Emergency Responder Radio Coverage System (ERRCS) test, you are not alone. Modern construction materials — especially low-E glass, metal structures, and dense insulation — frequently block public safety radio signals inside buildings.

We design, install, test, and commission ERRCS/BDA systems to help get your building compliant and ready for AHJ approval.

Speak With AN BDA System / ERRCS Expert Now: 866-206-5967

 

Fire departments require reliable communication for first responders. When radios don’t work everywhere inside the structure, occupancy approval can be delayed until the issue is corrected.

The good news: this is a very solvable problem.


Why Buildings Fail Radio Coverage Testing

Most property owners assume radios will work automatically because cell phones do. They don’t operate the same way.

Public safety radios use dedicated frequencies that must penetrate stairwells, basements, mechanical rooms, and elevator shafts.

Buildings typically fail for these reasons:

• Underground levels block signal
• Stairwells act like concrete shields
• Low-E glass reflects radio frequencies
• Metal roofing absorbs signal
• Larger floor plates exceed signal reach
• Nearby towers are too far away

If inspectors recorded “insufficient signal strength” or “grid failure,” the building must add an in-building radio system.


What the Fire Marshal Is Actually Requiring

When you fail an ERRCS test, the Authority Having Jurisdiction (AHJ) is requiring compliance with IFC Section 510 / NFPA 1225 (previously NFPA 72).

This means installing a Public Safety DAS / BDA System that:

• Amplifies incoming emergency radio signal
• Distributes it throughout the building
• Provides battery backup during outages
• Allows first responders to communicate anywhere inside

The goal is not stronger signal — it’s guaranteed communication coverage.


The Fastest Way To Pass Re-Inspection

Most delays happen because owners don’t know the order of steps.

Here’s the proper sequence:

  1. Review failed test report

  2. Perform RF survey & system design

  3. Submit plans to AHJ for approval

  4. Install ERRCS / BDA system

  5. Conduct acceptance test with inspector

When handled correctly, re-inspection can often occur within weeks instead of months.


How Berk-Tel Helps Buildings Pass Quickly

Berk-Tel Communications specializes in nationwide ERRCS compliance and works directly with inspectors and fire marshals.

We provide:

• Same-day budget ranges
• Engineering & design packages
• AHJ coordination
• Turn-key installation
• Acceptance testing support

Our goal is simple — help you obtain occupancy approval without construction delays.


Need Help After A Failed Radio Inspection?

If your project has failed or you were told a radio system is required, send us your test report or building plans and we’ll outline the next steps.

 

Scroll to Top